Templat ini dapat digunakan untuk membuat infobox untuk suatu mata air, termasuk geyser atau mata air panas.

Penggunaan sunting

{{{name}}}
{{{other_name}}}
[[File:{{{photo}}}|{{{photo_width}}}|alt={{{photo_alt}}}|upright=1.1]]
{{{photo_caption}}}
Asal nama{{{name_origin}}}
Lokasi{{{location}}}
Koordinat{{{coordinates}}}{{{coords_ref}}}
Sumber mata air{{{spring_source}}}
Elevasi{{{elevation}}}
Jenis{{{hot_spring_type}}}
Mengalirkan air untuk{{{provides}}}
Magnitudo{{{magnitude}}}
Ketinggian erupsi{{{height}}}
Kekerapan{{{frequency}}}
Panjang waktu{{{duration}}}
Aliran{{{flow}}}
Suhu{{{temperature}}}
Kedalaman{{{depth}}}
Peta topografi{{{topo}}}
[[File:{{{map_image}}}|{{{map_size}}}|alt={{{map_alt}}}]]
{{{map_caption}}}
{{{embedded}}}
Without photo_width
[[File:{{{photo}}}|frameless|alt={{{photo_alt}}}|upright=1.1]]
{{{photo_caption}}}
Umum digunakan Semua parameter
{{Infobox spring
| name = 
| photo = 
| photo_width = 
| photo_caption = 
| map = <!-- or | map_image = -->
| map_width = 
| map_caption = 
| name_origin = 
| location = 
| elevation = 
| coordinates = 
| coords_ref = 
| hot_spring_type =
| height = 
| duration = 
| frequency = 
| discharge = 
| temperature = 
| depth = 
}}
     
{{Infobox spring
| name = 
| other_name = 
| photo = 
| photo_width = 
| photo_alt = 
| photo_caption = 
| map = <!-- or | map_image = -->
| relief = 
| map_width = 
| map_alt = 
| map_caption = 
| mark = 
| mark_width = 
| label = 
| label_position = 
| name_origin = 
| location = 
| spring_source = 
| elevation = 
| coordinates = 
| coords_ref = 
| hot_spring_type = 
| type =
| provides = 
| magnitude = 
| height = 
| duration = 
| frequency = 
| discharge = 
| temperature = 
| depth = 
| child = 
| embedded = 
}}

Parameter descriptions sunting

Parameter Description
name Required. Official name of the geothermal feature (e.g. Old Faithful Geyser)
other_name If the feature is also commonly known by another name then use this parameter for the alternate name.
photo The name of an image file to be displayed. No special formatting is needed. For geysers, a photo of the eruption is preferred.
photo_width The image width in pixels. If specified, the maximum width is 280px. If not specified, the image uses frameless with upright=1.1 which displays it at approximately 110% of the user's default thumbnail size (for most users the image will display at 240px; for logged-in users who have changed the setting at Special:Preferences the displayed image could range from 130px to 440px). See also: Module:InfoboxImage, WP:AUTOSIZE, WP:EIS, WP:IMGSIZE, and MOS:IMGSIZE.
photo_alt Alternate text for the photo for visually impaired readers. See WP:ALT.
photo_caption The caption that will display bellow the image. Include month and year of picture, if known.
map The name of the location map to be displayed. See Map display methods below. To use a static image, use |map_image=
map_image The file name of a static map image to be displayed. To use a location map, use |map=.
map_relief When the geographical coordinates method is used (see Map display methods), any non-blank value (map_relief=yes, map_relief=1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
map_size or map_width Width to display the map image in pixels. The default and maximum is 220. For example, map_width=200 (not map_px).
map_alt Alternative text for the map image, see WP:ALT.
map_caption Text displayed below the map image, if required.
mark The image to use for the marker. The default is Red pog.svg. See Template:Location map for more information.
marker_width The display width of the marker image in pixels. Default = 8.
label Text that will be displayed next to the marker. Works with label_position below.
label_position Specifies the position of a label with respect to the marker. Valid values are left, right, top, bottom and none. See label above.
Coordinate related parameters
coordinates Can be used with {{coord}} template to display geographical coordinates and a pushpin on an optional map.
coords_ref Used with <ref>...</ref> tags to cite a references.
Other parameters
name_origin Where did the name of this feature originate? Who named this feature?
location Location of the feature. The specific location of the geyser first, followed by the general region. For well known geyser regions, use the local group or basin (e.g., Lower Geyser Basin, Yellowstone National Park).
spring_source Source for the water for the spring.
elevation The elevation of the feature (don't forget to include both feet and meters).
hot_spring_type The type of geothermal features. Possible options are geyser, fumarole, mud pot or hot spring. Geysers can be cone or fountain geysers. For non-geothermal springs, use type
type The type of spring. Possible options are. For geothermal springs, use hot_spring_type
provides Body of water into which the spring discharges.
height For geysers, the minimum to maximum height of an eruption (e.g. - 15 - 20 minutes)
duration For geysers, the minimum to maximum duration of an eruption
frequency For geysers, the average frequency of an eruption
discharge Water discharge for a geyser or a flowing spring
magnitude The magnitude of the discharge as measured by the spring classification scale
temperature For pools, the average temperature of the water in degrees Fahrenheit and Celsius
depth For pools, the average depth of the feature
child Used to embed this template in another. See below.
embedded Used to embed another template in this one. See below.

Map display methods sunting

This template uses Template:Location map. For more details, see the documentation for that template.

Simple map image method sunting

Any map image can be displayed by specifying the name of the image file. Notice that when a photo and a map are specified the map will appear at the bottom of the infobox and that if no photo is specified the map will be displayed at the top.

Daisy Geyser
Daisy Geyser during an eruption
Asal namaHague Geological Surveys, 1880s
LokasiUpper Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Koordinat44°28′12″N 110°50′42″W / 44.47000°N 110.84500°W / 44.47000; -110.84500
Elevasi7.329 kaki (2.234 m)
Suhu84.5 °C (184.1 °F)
Map of Upper Geyser Basin
{{Infobox spring
| name = Daisy Geyser
| photo = Daisy Geyser erupting in Yellowstone National Park edit.jpg
| photo_width = <!-- omitted to display at user's default size -->
| photo_caption = Daisy Geyser during an eruption
| map_image = NorthernSectionUpperGeyserBasin-Daisy.jpg
| map_caption = Map of Upper Geyser Basin
| map_size = 200
| name_origin = Hague Geological Surveys, 1880s
| location = Upper Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|28|12|N|110|50|42|W|display=inline}}
| coords_ref = 
| elevation = {{convert|7329|ft|0}}
| temperature = 84.5 °C (184.1 °F) 
}}
Big Cone
Big Cone Geyser
LokasiWest Thumb Geyser Basin, Yellowstone National Park, Teton County, Wyoming
Koordinat44°25′03″N 110°34′14″W / 44.41750°N 110.57056°W / 44.41750; -110.57056
Elevasi7.864 kaki (2.396,9 m)
Map shows Big Cone is in the West Thumb Geyser Basin.
West Thumb Geyser Basin
{{Infobox spring
| name = Big Cone
| photo = Big cone.jpg
| photo_width = 400px <!-- if a size in pixels is specified, the image will not display any larger than 280px -->
| photo_caption = Big Cone Geyser
| map_image = WestThumbGeyserBasin-Big Cone.jpg
| map_caption = West Thumb Geyser Basin
| map_alt = Map shows Big Cone is in the West Thumb Geyser Basin.
| map_size = 
| location = West Thumb Geyser Basin, Yellowstone National Park, [[Teton County, Wyoming]]
| coordinates = {{coord|44|25|03|N|110|34|14|W|type:landmark_region:US-WY}}
| coords_ref = 
| elevation = {{convert|7864|ft|m|1}}
}}

Geographical coordinate method sunting

A mark can be superimposed on one of a set of special map templates. If a valid map name is specified this is the method the template will attempt to use. To display a mark, the geographic coordinates must be specified using the {{Coord}} template. See the documentation for {{Location map}}. The parameters for this template correspond with a subset of the parameters for Template:Location map. A map template can be found using these sources:

List of templates - Many of the items listed here are redirects and a few templates may not function as expected.
Category:Location map templates - templates sorted by category.
Special:WhatLinksHere/Template:Location map/Info - a search that might help.
Special:Prefixindex/Template:Location map - another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for the for Alberta, Canada is Location map Canada Alberta. In this case specify map=Canada Alberta or, in this case, map=Alberta. The following example does not produce output that is optimum for use with the geysers of Yellowstone but demonstrates the method.

Big Alcove Spring
Lua error in Modul:Location_map at line 537: Tidak dapat menemukan definisi peta lokasi yang ditentukan. Baik "Modul:Location map/data/USA Wyoming" maupun "Templat:Location map USA Wyoming" tidak ada.
Koordinat44°43′8″N 110°42′24″W / 44.71889°N 110.70667°W / 44.71889; -110.70667
{{Infobox spring
| name = Big Alcove Spring
| map = USA Wyoming
| map_alt = Big Alcove Spring is located in the northwestern Wyoming
| map_caption = Location of Big Alcove Spring in Wyoming
| map_width = 200
| label = Big Alcove Spring
| coordinates = {{coord|44|43|8|N|110|42|24|W|region:US-WY|display=inline <!-- just to be tidy -->}}
}}

Label ini opsional. Secara default biasanya ditampilkan di sebelah kiri tanda.

Cakupan templat sunting

Templat ini dapat mencakup tempat infobox lain dengan menambahkan kode |child=yes. Untuk mencakup templat lain ke sini gunakan |embedded={{Infobox ....

Microformat sunting

Artikel yang dibuat dengan tempat ini menggunakan suatu hCard microformat. Untuk informasi tambahan, mohon membaca di sini.

Kategori pelacak sunting